Danfoss Power Solutions' NFPE control option enables OEMs to use its MP1 pump as an automotive-type control.
A Non-Feedback Proportional Electric (NFPE) control option for Danfoss Power Solutions’ MP1 closed-circuit, axial-piston pumps will be available in early 2018 as a standard option for all MP1 frame sizes (28/32 and 38/45 cm³). Implementing the NFPE control option enables OEMs to use the MP1 pump as an automotive-type control by combining MP1 pump portfolio with Danfoss controllers and software. The NFPE option is designed to enhance applications such as compact wheel loaders, dumpers, sweepers, and telehandlers.
The scope of MP1 applications is broadened with the control portfolio that now includes three-position electric control, electrical displacement control, manual displacement control, and now the NFPE control.
The benefits of implementing the NFPE control option to the MP1 pump include:
High system efficiency while aligning with Tier-IV and Stage 5-compliant engines.
Compatibility with Danfoss automotive controllers and software, ensuring machines achieve high productivity.
Built-in flexibility through common pump platforms for controls and porting; this modularity reduces manufacturing variation for simplified component sourcing and improves time to market.
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
