Miniature Solenoid Valves & Manifolds for Low Flows
Feb. 12, 2019
Nitra GVP series pneumatic miniature solenoid valves for low-flow requirements have two- and three-port configurations for on-off flow control.
Nitra GVP series pneumatic miniature solenoid valves for low-flow requirements have two- and three-port configurations for on-off flow control. These 12- or 24-V dc valves are available in 10- and 15-mm widths and in 2-way or 3-way normally closed configurations. Latching solenoid valves are available in 3-way normally closed configuration and will stay open after being momentarily energized to conserve power. Momentary reverse polarity closes valve. These valves can be used with company’s GM-3 series compact machined manifolds, available in single to six stations for 10-mm manifolds and in single to four stations for 15-mm manifolds.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
