The NITRA ISO 5599/1 pneumatic solenoid valve components are completely interchangeable with any brand of ISO 5599/1 equipment. The ISO 5599 size one and size two components include solenoid valve bodies in 5-way, 2-position configurations with single or double solenoids and 5-way, 3-position, double solenoid valves with a center-pressure, center-closed or center-exhaust configuration.
Stand-alone bases and manifold components with a side or bottom orientation and NPT or G-thread ports are also offered. Solenoid coils are available in 12V DC, 24V DC, 24V AC, 110V AC and 220V AC; accessories include manifold blanking plates, inlets, blind ends and seal kits.
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
