Polaris PH gear pumps and motors are built in three pieces with a cast iron body for higher operating parameters and versatility regarding shafts, flanges, ports, and built-in valves. The possibility to mate the body with the cast-iron ...
Polaris PH gear pumps and motors are built in three pieces with a cast iron body for higher operating parameters and versatility regarding shafts, flanges, ports, and built-in valves.
The possibility to mate the body with the cast-iron covers further reduces noise levels, in addition to increasing strength. They feature displacements from 1.16 in.≥/rev to 2.01 in.≥/ rev (19.09 cc/rev to 33.03 cc/rev) and operate in maximum peak pressure up to 4350 psi (300 bar).
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
