Tear caps feature a side tab that tears away for easy removal. They fit more than 20 SAE and NPT thread sizes in sizes from 0.365 to 2.49 in. ID and 0.405 to 2.375 in. ID (NPT). They are made from low density polyethylene in lengths from 0.44 ...
Tear caps feature a side tab that tears away for easy removal. They fit more than 20 SAE and NPT thread sizes in sizes from 0.365 to 2.49 in. ID and 0.405 to 2.375 in. ID (NPT). They are made from low density polyethylene in lengths from 0.44 to 1.2 in. and 0.319 to 0.887 in. (NPT).
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
