Honing system

Hydraulic cylinder honing system Appeared in print as "Honing system" All-electric HTA hone brings increased part capacity and stroker torque to bore resurfacing of hydraulic cylinders and repair of actuators for mobile equipment. Two ...
May 13, 2011

Hydraulic cylinder honing system

Appeared in print as "Honing system"

All-electric HTA hone brings increased part capacity and stroker torque to bore resurfacing of hydraulic cylinders and repair of actuators for mobile equipment. Two standard sizes — HTA- 2100 for 6.9-ft part lengths and HTA-4100 for 13.5-ft part lengths, accommodate true 2- or 4-m parts. Both handle parts with bore ID of 2.5 to 21 in. and maximum part OD of 24 in., and weights to 8000 lb. It can also be custom-configured. It is ideal for resurfacing and repair work where light-duty stock removal up to 0.030 in. is needed to oversize deeply scratched bores.

Sunnen Products Co., (800) 325-3670, bit.ly/HP511SunnenHTA

About the Author

Sign up for our eNewsletters
Get the latest news and updates