Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 New Product 32079 Products01 00000017512

Linear position encoders

Oct. 3, 2006
Linear position encoders BML linear position encoders provide direct measurement of a load's linear position regardless of actuator backlash or mechanical wear. They feature 24 m of noncontact, wear free position tracking at speeds to 10 m/s with no ...

Linear position encoders

BML linear position encoders provide direct measurement of a load's linear position regardless of actuator backlash or mechanical wear. They feature 24 m of noncontact, wear free position tracking at speeds to 10 m/s with no signal degradation over time. Two noncontact models — S1A and S1B — offer maximum resolution of 1 and 5 µm, respectively, and maximum system accuracy of ± 50 µm. They tolerate a wide operating gap — up to 0.34 and 2.0 mm for the S1A and S1B, respectively — without sacrificing accuracy.

Balluff Inc.,
(800) 543-8390,
www.balluff.com

Continue Reading

May 10, 2022
The companies plan to jointly test and validate the latest version of the RISE Cylinder to aid electrification of heavy-duty equipment.
Dec. 12, 2023
With a mild recession predicted for 2024, fluid power manufacturers should use this time to invest in their business and prepare for the rebound coming in the second half of the...

Sponsored Recommendations

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...