SS250A double diaphragm, 2- and 3- way valves are made from corrosion resistant 316 stainless steel and Viton. They operate in temperatures to 400°F, speeds to 600 cpm, and pressures to 125 psig (NC) and 60 psig (NO). They ...
SS250A double diaphragm, 2- and 3- way valves are made from corrosion resistant 316 stainless steel and Viton.
They operate in temperatures to 400°F, speeds to 600 cpm, and pressures to 125 psig (NC) and 60 psig (NO). They offer a short stroke of 0.060 in. O-rings and sliding seals are not required, as they tolerate clean and dry or dirty and wet air.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
