• Fluid Power Basics
  • Resources
  • Directory
  • Webinars
  • Digital Edition
  • WISE
  • CAD Models
  • Advertise
    • Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads 2012 05 Mindman Maf
    1. Pneumatics
    2. Air Filters and FRLs

    Air lubricators

    May 2, 2012
    Line of Mindman air units lubricates air tools, cylinders, valve, air motors, and other air-driven devices. They are available in port sizes from 1⁄8 to 11⁄2 in. and rated for pressures to 17.5 kgf/cm2 (1.75 MPa) and temperatures to 80°C.
    Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads 2012 05 Mindman Maf
    Line of Mindman air units lubricates air tools, cylinders, valve, air motors, and other air-driven devices. They are available in port sizes from 1⁄8 to 11⁄2 in. and rated for pressures to 17.5 kgf/cm2 (1.75 MPa) and temperatures to 80°C. They offer lubricating oil capacity from  20 to 1000 cc. Stainless steel 316 is available in three models. In addition to PT threads, BSP and NPT are also available.

    Airstra Corp., (909) 606-8610, bit.ly/hp512airstra

    Continue Reading

    BOOK 2, CHAPTER 12: Fluid Motor Circuits

    March 18, 2009
    Table of Contents

    Motor leakage variations

    Oct. 18, 2006
    affect low-speed performance

    Sponsored Recommendations

    All-In-One DC-UPS Power Solutions

    March 13, 2024
    Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

    Motor Disconnect Switches

    March 13, 2024
    With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

    Industrial Straight-Through Cable Gland

    March 13, 2024
    Learn more about Altech's cable glands and all they have to offer for your needs!

    7 Key Considerations for Selecting a Medical Pump

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...