• Fluid Power Basics
  • Resources
  • Directory
  • Webinars
  • Digital Edition
  • WISE
  • CAD Models
  • Advertise
    • Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 New Product Newprod0202png 00000000305
    1. Hydraulics
    2. Hydraulic Valves

    Tough valves

    April 3, 2005
    Series II valve SPECS Flow: to 75 gpm; to 60 ft/sec Pressure: to 6,000 psi Pilot pressure: 80 psi air; 250 psi hydraulic FEATURES Integrated rack-and-pinion actuator Made of bronze and stainless steel ...

    SPECS

    Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads Custom Inline Archive Www hydraulicspneumatics com Content Site200 New Product Newprod0202png 00000000305
    Series II valve

    Flow: to 75 gpm; to 60 ft/sec
    Pressure: to 6,000 psi
    Pilot pressure: 80 psi air; 250 psi hydraulic
    FEATURES

    • Integrated rack-and-pinion actuator
    • Made of bronze and stainless steel
    • Shear-Seal technology directs fluid flow through internal galleries

    Barksdale Control Products
    (800) 835-1060
    www.barksdale.com

    Continue Reading

    BOOK 2, CHAPTER 12: Fluid Motor Circuits

    March 18, 2009
    Table of Contents

    Motor leakage variations

    Oct. 18, 2006
    affect low-speed performance

    Sponsored Recommendations

    All-In-One DC-UPS Power Solutions

    March 13, 2024
    Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

    Motor Disconnect Switches

    March 13, 2024
    With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

    Industrial Straight-Through Cable Gland

    March 13, 2024
    Learn more about Altech's cable glands and all they have to offer for your needs!

    7 Key Considerations for Selecting a Medical Pump

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...