The PRAS26 Series magnetic angle sensors for automated applications offer an absolute output signal over the entire 0 to 360° measurement range. The sensor’s constant wear-free operation is through the use of an external position magnet. The device’s flat housing is made of heat-resistant materials, such as thermoplastic and epoxy glass fiber. Completely encapsulated electronics withstand strong shocks, vibration, and moisture penetration. The sensor is equipped with the analog outputs 0.5 to 4.5 V, 0.5 to 10 V, or 4 to 20 mA.
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...