Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads 2012 11 Oil Eater Heavy Duty Spill Kit

Spill kits

Nov. 9, 2012
All-in-one spill kits contain and clean up hazardous material spills in manufacturing plants, as required by OSHA and the EPA. Kits are available in both 65- and 95-gal overpacks. Each kit contains absorbent pads, pillows, universal snakes, booms, protective gloves, oil-resistant high temperature disposal bags and an emergency response instruction guide.
All-in-one spill kits contain and clean up hazardous material spills in manufacturing plants, as required by OSHA and the EPA. Kits are available in both 65- and 95-gal overpacks. Each kit contains absorbent pads, pillows, universal snakes, booms, protective gloves, oil-resistant high temperature disposal bags and an emergency response instruction guide. Oil Eater Original cleaner is included in each kit to clean surfaces after the spill has been absorbed. It is non-toxic, non-corrosive, non-flammable and biodegradable.

Kafko International Ltd., (800) 354-9061, bit.ly/hp1112kafko

Continue Reading

Oct. 5, 2022
Through mergers and acquisitions, companies have the opportunity innovate faster and serve new markets.
Dec. 30, 2019
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.

Sponsored Recommendations

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Feb. 6, 2024
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Feb. 6, 2024
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Feb. 6, 2024
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...