Measurement Specialties’ new PT420 absolute linear position transducer, has a full-scale measurement range from 2 in. to 100 in. with infinite output resolution. Its two output signals,
Measurement Specialties’ new PT420 absolute linear position transducer, has a full-scale measurement range from 2 in. to 100 in. with infinite output resolution. Its two output signals, 2-wire 4-20 mA and 3-wire 0-20 mA, provide a feedback signal linearly proportional to the position of its extension cable. The sensor is a classic string pot design and is suitable for many industrial automation and testing applications. It can be used for measuring position on hydraulic cylinders and other linear displacement measuring applications.
Repeatability is ±0.05% full stroke and accuracy to ±0.15% full stroke for most ranges. It operates from -40°C to +90°C and can withstand 10 G of vibration to 2,000 Hz maximum. A DIP-switch setting enables output signal direction to be reversed. To ensure signal values match up with the beginning and end stroke points, users can adjust the zero and span trim pots. The product is encased in a IP50 NEMA 1 rated anodized aluminum house, is less than 5 inches high when cable is retracted, and weighs less than 2 lb.
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
