Hydraulicspneumatics 1614 Tlon Facility P1

Seal Manufacturer Expands Facilities

Oct. 4, 2013
A strong growth pattern over the last three years is the catalyst behind the 13,140-sq-ft addition to T-Lon Products Inc., Hartland, Wis., existing 40,000-sq-ft facility. MSI General Corp., Oconomowoc, Wis., will design, engineer, and construct the addition. The additional space will allow T-Lon Products to accommodate the growth and anticipated future contracts.
A strong growth pattern over the last three years is the catalyst behind the 13,140-sq-ft addition to T-Lon Products Inc., Hartland, Wis., existing 40,000-sq-ft facility. MSI General Corp., Oconomowoc, Wis., will design, engineer, and construct the addition. The additional space will allow T-Lon Products to accommodate the growth and anticipated future contracts. T-Lon Products designs and manufactures Teflon seals for many applications, including for the agriculture and food processing industries. “The industries we supply to are in a growth mode and I think we are being recognized in the marketplace as a very value-added supplier,” says Vice President Bob Olsen.

Continue Reading

BOOK 2, CHAPTER 12: Fluid Motor Circuits

March 18, 2009
Table of Contents

Motor leakage variations

Oct. 18, 2006
affect low-speed performance

Sponsored Recommendations

All-In-One DC-UPS Power Solutions

March 13, 2024
Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

Motor Disconnect Switches

March 13, 2024
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

Industrial Straight-Through Cable Gland

March 13, 2024
Learn more about Altech's cable glands and all they have to offer for your needs!

7 Key Considerations for Selecting a Medical Pump

Feb. 6, 2024
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...