Manufacting on the upswing

PMI Solidifies in July Behind Renewed Optimism

Aug. 4, 2020
Growth in new orders and production pushes the index to 54.2%.

With new orders and production on the rise, manufacturing posted its second straight month of growth and its highest reading in more than a year, according to the Institute of Supply Management’s PMI Index for July.

The July PMI was 54.2% in July, up from 52.6% in June and well off the 41.5% mark in April. The index had been below the 50% growth level for seven of the last 12 months, so two straight months of growth for the sector was welcome news.

"In July, manufacturing continued its recovery after the disruption caused by the coronavirus (COVID-19) pandemic,” said Timothy Fiore, chairman of the ISM’s Manufacturing Business Survey Committee. “Panel sentiment was generally optimistic (two positive comments for every one cautious comment), continuing a trend from June. Demand expanded, with the New Orders Index growing at a strong level, supported by the New Export Orders Index re-entering expansion.

“The growth cycle continues for the second straight month after three prior months of COVID-19 disruptions,” Fiore added. “Demand and consumption continued to drive expansion growth, with inputs remaining at parity with supply and demand. Among the six biggest industry sectors, Food, Beverage & Tobacco Products remains the best-performing industry sector.”

While not all sectors are showing growth, committee member comments reflected the renewed optimism. Among the comments:

  • “Orders starting to pick up. [An] increase of about 35% to 40%.” (Chemical Products) 
  • “Overall business remains down almost 70%. We are hanging on to as many employees as possible, but we will have to lay off 30% or more for at least two to three months until September or October.” (Transportation Equipment) 
  • “While demand in the coming six months is stabilizing, it is at a significant reduction and clear that customers have little confidence in the forecasts. Export orders to Brazil, South Africa, [and the] Middle East are largely cancelled for balance of 2020.” (Fabricated Metal Products) 
  • “Manufacturing outlook has improved greatly in June, as business has resumed at nearly 100%. We have implemented a number of safeguards that are costing extra money, but we are running.” (Computer & Electronic Products) 
  • “Stabilizing demand for refrigerated and frozen beverage and dessert, but still at higher level than a year ago. Uncertainty of school opening in the fall: How much demand will continue or shift will be dictated by students returning to school or not.” (Food, Beverage & Tobacco Products) 
  • “Uncertainty regarding our industry and business has not improved. We are developing the 2021 budget around multiple scenarios.” (Petroleum & Coal Products) 
  • “Incoming orders are slow. This is usually our busiest time of the year, but production is reduced due to lack of demand. Additional layoffs expected.” (Furniture & Related Products) 
  • “General business climate continues to be subdued, driving highly conservative forecasting due to variability in the ongoing pandemic-driven conditions and economic response.” (Machinery) 
  • “We are still seeing our customers shut down or effected by COVID-19. We are hoping for a bounce-back in September.” (Miscellaneous Manufacturing) 
  • “General business conditions are in a general slowing pattern. Many of the plants are on reduced hours and/or furloughs. About 20% to 25% of plants are scheduled to be consolidated in the next six months to improve margins and profitability.” (Nonmetallic Mineral Products)
About the Author

Bob Vavra | Senior Content Director, Power & Motion and Machine Design

Bob Vavra is the Senior Content Director of Power & Motion and its sister publication Machine Design. Vavra has had a long career in publishing, media and events. He has covered all aspects of manufacturing for the past 20 years and is a regular attendee at events such as IMTS and Hannover Messe. Vavra is also a sought-after webcast moderator and event emcee, and has presided over events in the U.S., Germany and China. 

Continue Reading

Handbook Simplifies Advanced Aspects of Mobile Hydraulic Controls

May 10, 2017
Author Brendan Casey lays out his hydraulics know-how that he acquired over 27 years in a simple handbook made for people that want to improve their skills in troubleshooting ...

The Impacts of Electrification on Fluid Power Systems

May 15, 2023
Electrification presents challenges as well as opportunities to re-evaluate and improve upon the design of hydraulics and pneumatics.

Sponsored Recommendations

MONITORING RELAYS — TYPES AND APPLICATIONS

May 15, 2024
Production equipment is expensive and needs to be protected against input abnormalities such as voltage, current, frequency, and phase to stay online and in operation for the ...

Circuit Protection Devices & Busbars

March 13, 2024
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...

All-In-One DC-UPS Power Solutions

March 13, 2024
Introducing the All-In-One DC-UPS, a versatile solution combining multiple functionalities in a single device. Serving as a power supply, battery charger, battery care module,...

Motor Disconnect Switches

March 13, 2024
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure...