WS family of low-speed/high-torque hydraulic motors feature flow rates to 76 lpm continuous, torque to 824 N-m continuous, and pressures to 207 bar continuous. They are are designed with a three zone commutator valve for higher ...
WS family of low-speed/high-torque hydraulic motors feature flow rates to 76 lpm continuous, torque to 824 N-m continuous, and pressures to 207 bar continuous. They are are designed with a three zone commutator valve for higher flow capacity, tapered roller bearings to accommodate side loads, and an extra large drive link to withstand pressure and torque spikes. Nine displacements are available ranging from 100 to 508 cc/rev.
In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.
Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...
