• Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads 2012 09 Ifpe Logo

    IFPE 2014 issues call for papers

    Sept. 7, 2012
    The IFPE Education Committee issued a call for papers for the next IFPE Technical Conference, which will be part of IFPE 2014. Scheduled for March 4 to 8, 2014 at the Las Vegas Convention Center. IFPE 2014 is an international exposition and technical conference dedicated to integrating fluid power with other technologies for power transmission and motion control applications. It will be held in conjunction with ConExpo/ConAgg, which is conducted by The Association of Equipment Manufacturers (AEM).

    The IFPE Education Committee issued a call for papers for the next IFPE Technical Conference, which will be part of IFPE 2014. Scheduled for March 4 to 8, 2014 at the Las Vegas Convention Center, IFPE 2014 is an international exposition and technical conference dedicated to integrating fluid power with other technologies for power transmission and motion control applications. It will be held in conjunction with ConExpo/ConAgg, which is conducted by The Association of Equipment Manufacturers (AEM).

    The IFPE Conference will feature presentations by international experts hydraulics, pneumatics, power transmission, and their control. Papers presented at the conference will be published in subsequent proceedings.

    Hydraulicspneumatics Com Sites Hydraulicspneumatics com Files Uploads 2012 09 Ifpe Logo
    Abstracts are now being accepted for the following topics: • Fluid power systems — hydraulic, hydromechanical, hydro-electric, hybrid (energy storage) • Basic components — pumps, motors, transmissions (HST, HMT, hybrid), actuators, electronics, valves, fluid conductors • Analysis, modeling, simulation — component, fluid system, system-vehicle integration and optimization, control systems • Noise and vibration — analysis, measurement, control; fluidborne, structureborne, airborne • Fluids — new fluids, green concerns (biodegradable), fluid properties, contamination, filtration • Materials / manufacturing — new materials, improved manufacturing practices (tolerances, reliability, efficiency), green materials and manufacturing techniques • Auxiliary components related to fluid power — electric motors, brakes, clutches, gear boxes, linear positioners, belts and pulleys, sensors, communication protocols • Standards — industry, national, international • Fluid power in renewable energy applications • Impact of Tier 4 and beyond • Controls and control systems • Seals and sealing technology

    The deadline for submitting abstracts for the IFPE 2014 Conference has not been announced, but is expected to be late May or early June 2013, and the list of topics are subject to change. For more information visit www.ifpe.com/education.

    Continue Reading

    Oct. 5, 2022
    Through mergers and acquisitions, companies have the opportunity innovate faster and serve new markets.
    Dec. 30, 2019
    In a departure from conventional wisdom, motion control can be implemented to increase production rate and product quality and consistency—all at the same time.

    Sponsored Recommendations

    Feb. 6, 2024
    Newcomers to medical device design may think pressure and flow rate are sufficient parameters whenselecting a pump. While this may be true in some industrial applications, medical...
    Feb. 6, 2024
    Variable volume pumps, also known as precision dispense pumps, are a positive displacement pump that operates by retracting a piston to aspirate a fluid and then extending the...
    Feb. 6, 2024
    Acheck valve, a non-return or one-way valve, is a mechanical device that allows a gas or liquid to flow freely in one direction while preventing reverse flow in the opposite ...
    Feb. 6, 2024
    Engineers tasked with managing fluid flow talk about both holes and calibrated orifices, but they are two distinct entities. A hole can be any opening, but a calibrated orifice...